Gas Supply or Valve Issues (For Gas Water Heaters)

[chandonar0]

Turn off the circuit breaker that supplies power to the water heater to test the heating elements. Next, check the continuity of each heating element with a multimeter. An element that shows no continuity is to be replaced.
Replace Damaged Heating Elements: If you find a bad element, you can replace it by buying the right part for your Bradford White model. If you don’t follow the manufacturer’s instructions or don’t know how to do it, you can seek help from a professional.
Pilot Light Issues (For Gas Water Heaters)
The pilot light is important for igniting the burner that heats algeria mobile numbers list the water in gas-powered Bradford White water heaters. Without a pilot light your heater won’t produce hot water.

How to Fix It:
Relight the Pilot Light: Follow the instructions on the water heater’s label if the pilot light has gone out. You’ll usually have to turn the gas valve to the ‘off’ position, wait a few minutes, and then set it to ‘pilot’ before lighting it with a match or igniter.
Check the Thermocouple: The gas flow is controlled by the thermocouple which senses if the pilot light is on. It might even shut off the gas supply if it’s faulty, even if the pilot is lit. In this case, replacing the thermocouple is necessary.